|
|
KMM/TZS
Tepelné zpracování
Garanti: Ing. Jiří Hájek, Ph.D.
|
|
|
|
Předmět - literatura
KMM/TZS
- IS/STAG
Základní
Kraus, Václav,
Technologie tepelného zpracování 1.
, Plzeň : ZČU
1992
Kraus, Václav,
Technologie tepelného zpracování 2.
, Plzeň : ZČU
1992
Kraus, Václav,
Tepelné zpracování a slinování
, Plzeň : Západočeská univerzita
2000
Doporučená
G. E. Totten,
Steel Heat Treatment Equipment and Process Design
, Portland
2007
G. E. Totten,
Steel Heat Treatment Handbook
, Portland
2006
J.R. Davis,
Surface Hardening of Steels
2002
|
|
|
|
|
Další doporučená literatura
-
BROOKS R. CHARLIE, Principles of the Heat Treatment of Plain Carbon and Low Alloy Steels. Knoxville, 1996.
-
Powder Metal Technologies and Apllications. Volume 7, ASM International 1998.
-
DAVIS J.R., Surface Hardening of Steels, ASM International 2002.
-
PARRISH GEOFFREY, Carburizing: Microstructures and Properties, ASM International 1999.
-
TOTTEN G., HOWES M., INOUE T., Handbook of Residual Stress and Deformation of Steel, ASM International 2002.
-
RAKHIT A.K., Heat Treatment of Gears, ASM International 2000.
-
TRINKS W.,MAWHINNEY M.H., SHANNON R. A., REED R. J., Industrial Furnaces Sixth Edition, John Wiley & Sons Inc. 2004.
-
BRAMFITT L. BRUCE, BENSCOTER O. ARLAN, Metallographer’s Guide Practices and Procedures for Irons and Steels, ASM International 2002.
-
PORTER D.A., EASTERLING K. E., Phase Transformations in Metals and Alloys, Chapman & Hall 1992.
-
BOYER E. HOWARD, Practical Heat Treating, American Society for Metals 1984.
-
PYE DAVID, Practical Nitriding and Ferritic Nitrocarburizing, ASM International 2003.
-
FOLTÝNEK JAROSLAV, Prášková metalurgie a základy procesu slinování , [netištěná bakalářská práce] Brno, Vysoké učení technické v Brně, Fakulta strojního inženýrství 2011.
-
George E. Totten, Lauralice C. F. Canale, Hans M. Tensi, BoŽidar LiŠČiĆ, Quenching Theory and Technology, CRS Press 2010.
-
MARTÍNEK RADISLAV, Senzory v průmyslové praxi, Praha, BEN-technická literatura 2004.
-
TOTTEN E. GEORGE, Steel Heat Treatment : Metallurgy and Technologies, CRS Press 2007.
-
TOTTEN E. GEORGE, Steel Heat Treatment: Equipment and Process Design, CRS Press 2007.
-
ROBERTS GEORGE, KRAUSS GEORGE, KENNEDY RICHARD, Tool Steels, ASM International 1998.
-
KHAN ULLAH RAFI, Vacuum Gas Carburizing – Fate of Hydrocarbons, [netištěná disertační práce], Karlsruhe, Univerzita Karlsruhe 2008.
-
Heat Treating as Volume 4 of the ASM Handbook, ASM International 1991.
-
Nondestructive Evaluation and Quality control as Volume 17 of the ASM Handbook, ASM International 1989.
-
Properties and Selection: Nonferrous Alloys and Special-Purpose Materials as Volume 2 of the Edition Metals Handbook, ASM International 1990.
-
Materials Characterization as Volume 10 of the ASM Handbook, ASM International.
-
Composites as Volume 21 of the ASM Handbook, ASM International 2001.
-
CANTOR B.,GRANT P., JOHNSTON C., Automotive Engineering, Lightweight, Functional and Novel Materials, Taylor & Francis. 2008.
-
ASHBY f. m., JONES D. R.H., Engineering Materials 1, an Introduction to their Properties & Aplications, Butterworth- Heinemann 1980.
-
ASHBY f. m., JONES D. R.H., Engineering Materials 2, an Introduction to Microstructures, Processing and Design, Butterworth- Heinemann 1986.
-
STACHOWIAK G.W., BATCHELOR A. W., Engineering Tribology, Butterworth- Heinemann.
-
Fatigue and Fracture as Volume 19 of the ASM Handbook, ASM International 1996.
-
Friction Lubrication and Wear Technology as Volume 18 of the ASM Handbook, ASM International 1992.
-
TOTTEN E. GEORGE, MACKENZIE SCOTT D., Handbook of Aluminum 2, Alloy Production and Materials Manufacturing, Marcel Dekker, Inc.
-
TOTTEN E. GEORGE, MACKENZIE SCOTT D., Handbook of Aluminum 1, Physicall Metallurgy and Processes, Marcel Dekker, Inc. 2003.
-
SPENCER A., ZWICKY A., The Handbook of Morphology, Blackwell publishing. 2001.
-
ASKELAND D., Engineering of Materials, Nelson Thomas. 2001.
-
MYERS RICHARD L., The 100 Most Important Chemical compounds, a Reference Guide, Greenwooh press 2007.
-
BROOKS CHARLIE R., Principles of the Heat Treatment of Plain Carbon and Low Alloy Steels, ASM International 1999.
-
CALLISTER WILLIAM D. Jr., RETHWISCH DAVID G., Materials Science and Engineering an Introduction. John Wiley & Sons 2010.
-
Informační materiály firmy Linde: Furnace Atmospheres No.2
-
Furnace Atmospheres No.1
-
Furnace Atmospheres No.3
-
Furnace Atmospheres No.6
-
Furnace Atmospheres No.4
-
Sub-Zero Treatment of Steels
-
Furnace Atmospheres for Tube of Annealing
-
Failure Analysis and Prevention as Volume 11 of the ASM Handbook, ASM International 2002.
-
VLACH, FIEDLER, Úvod a přehled značení ocelí a litin
-
Informační materiály firmy WorldAutosteel: Advanced High Strenght steel Aplication Guidelines ver. 4.1
-
KABEŠ KAREL , Analyzátory plynu firmy Fuji Electric Instruments. Automatizace 11/2005. č.11 s.724.
-
LACHMUND H., XIE Y., LAMP T., KOCHNER H., Aplication of direct optical temperature measurement in the steelmaking process, European Communitties 2009.
-
Properties and Selection: Irons Steels, and Hight Performance Alloys as Volume 1 of the ASM Handbook, ASM International 1993.
-
Alloy Phase diagrams as Volume 3 of the ASM Handbook, ASM International 1992.
-
Forming and Forging as Volume 14 of the ASM Handbook, ASM International 1993.
-
Casting as Volume 15 of the ASM Handbook, ASM International 1992.
-
Friction, Lubrication, and Wear Technology as Volume 18 of the ASM Handbook, ASM International 1992.
-
Surface Hardening of Steels, Process Selection Guide, ASM International 2002.
-
Metallography and Microstructures 2004 as Volume 9 of the ASM Handbook, ASM International 2004.
-
Mechanical Testing and Evaluation as Volume 8 of the ASM Handbook, ASM International 2000.
-
PEACOCK RAYMOND G., A Review of Non-Contact Process Temperature Measurement in Steel Manufacturing. SPIE Conference on Termosense XXI., 5/1999.
-
ZHIGILEI LEONID, Phase Diagrams and Kinetics, MSE 3050
-
PARRISH GEOFFREY, Carburizing Microstructures and Properties, ASM International 1999.
-
Čištění jako část tepelného zpracování, SurTec ČR technický dopis 13A, s 1-13.
-
VOORT VANDER F.G., BUEHLER Ltd., BLUFF L., prezentace: Color Metallography, Illinois USA.
-
Informační materiály firmy SCHMETZ.
-
Informační materiály firmy ThyssenKrupp: Complex phase steels CP-W and CP-K.
-
Patentový spis č. 279 839, Úřad průmyslového vlastnictví, zveřejněno: 1992.
-
Informační materiály firmy NETZSCH: Dilatometrie.
-
KABEŠ KAREL, Průmyslové analyzátory složení plynů – přehled trhu. Automatizace 11/2005. č.11 s.717-723.
-
MICHNA Ś., LUKÁČ I., OTČENÁŠEK V., KOŘENÝ R., DRÁPAL J., SCHNEIDER H., MIŠKUFOVÁ A., KOL. Encyklopedie hliníku, Adin. 2005.
-
Energy Performance Assessment of Furnace of Bureau ofEnergy Efficiency.
-
POLAK T.A., PANDE C., Engeneering Measurement, methos and Intrinsic Errors, Edmunsbury Press Limited 1999.
-
VOORT VANDER F. G., BUEHLER Ltd., BLUFF L., prezentace: Etching to Reveal Microstructure, Illinois USA.
-
CANALE L.C.F., MESQUITA R.A., TOTTEN G.E., Failure Analysis of Heat Treated Steel Components, ASM International 2008.
-
KLUEH R.L., NELSON A.T., Ferritic/ Martensitic steel for next-generation reactors, Journal of Nuclear Materials 371 (2007), s.37-52.
-
Informační materiály firmy WorldAutosteel: Future steel vehicle, 5/2011
-
Composite Materials Handbook volume 3. Polymer Metrix Composites Materials Usage, Design, and Analysis of Department of Defence Handbook, 2002.
-
PETERS S.T., Handbook of Composites, Chapman & Hall 1998.
-
BROWN MICHAEL E., Handbook of Thermal Analysis and Calorimetry, volume 1 Principles and Practice, Elsevier 1998.
-
BROWN MICHAEL E.,GALLAGHER PATRICK K. Handbook of Thermal Analysis and Calorimetry, volume 2, Aplications to Inorganic and Miscellaneous Materials, Elsevier 2003.
-
CHENG STEPHEN Z.D., Handbook of Thermal Analysis and Calorimetry, volume 3, Aplications to Polymers and Plastics, Elsevier 2002.
-
HARPER CHARLES A., Handbook of Materials for Product Design, McGraw-Hill, 2001.
-
Heat Treating Data Book, 10. Vydání, SecoWarwick,2001.
-
LEE D.B., CHOI J.W., Hight Temperature Oxidation of Steels in Air and CO2- O2 Atmosphere, Oxidation of Metals, Vol.64, Nos 5/6,2005.
-
SLAVÍČEK JIŘÍ, Hliník a jeho slitiny v automobilovém průmyslu, [netištěná bakalářská práce] Brno, Vysoké učení technické v Brně, Fakulta strojního inženýrství 2011.
-
HUMÁR ANTON, prezentace: Materiály pro řezné nástroje, Vysoké učení technické v Brně, Fakulta strojního inženýrství 2006.
-
KAUFMAN GILBERT, Introduction to Aluminum Alloys and Tempers, ASM International 2000.
-
TENZI H.M., STICH A., TOTTEN G.E., Fundamentals about Quenching by Submering, Heat Treating Conference, Illinois, 5/1994.
-
Informační materiály firmy The Herring Group: Oil Quenching, 2010.
-
KONTOROVIČ D. E., Tepelné zpracování oceli a litiny, Státní nakladatelství technické literatury, Praha 1933.
-
BHADESHIA H.K.D.H., Worked Examples in the Geometry of Crystals, The Institute of Metals, 2006.
-
Informační materiály firmy LAC: Laboratorní pece a sušárny.
-
ROUČKA JAROMÍR, Metalurgie litin
-
MARRIOT J.B., PITHAN K., A review of the properties of 9-12% Cr steels for use as HP/IP rotors in advanced steam turbines, European Communitties 1989.
-
ASHBY M., SHERCLIFF H., CEBON D., Materials, Engineering, Science, Processing and Design, Elsevier 2007.
-
GLAESER WILLIAM A., Materials for Tribology, Elsevier, 1992.
-
Informační materiály firmy Voestalpine: Cold-rolled steel strip
-
IOANNOU JOHN, Mechanical Behaviour and Corrosion of Interstitial-Free Steel to Aluminium Alloy Self- Piercing Riveted Joints, Hertfordshire, 2009.
-
DIETER GEORGE E., BACON D., Mechanical Metallurgy, McGraw-Hill Book Company, 1988.
-
FHAO J.C., Methods for Phase Diagram Determination, Elsevier.
-
SMALLMAN R. E., BISHOP R.J., Modern Physical Metallurgy and Materials Engineering, Butterworth Heinemann 1999.
-
JANOVEC J., CEJP J., STEIDL J., Perspektivní Materiály, ČVUT Praha 2008.
-
MOHRBACHER, příspěvek z konference Metal 2005: Modern steel grades and advanced semi-products for automotive body aplications, 2005.
-
Encyklopedia of Nanoscience and Nanotechnology, American Scientific Publishers, 2004.
-
Nástrojové oceli v praktických aplikacích, Asociace pro tepelné zpracování kovů, Praha 2009.
-
LIEDTKE DIETER, Warmebehandlung von Stahl – Nitrieren und Nitrocarburieren, Stahl.
-
YANG MEI, Nitriding – fundamentals, modeling and process optimization, [netištěná disertační práce], Worcester Polytechnic Institute., 2012.
-
WINTER K.M., Gaseous Nitriding: In Theory and in Real Life, Process-Electronic
-
FLODSTROM I., Nitrocarburizing and Hight Temperature Nitriding of Steel for Bearing Aplications, [netištěná diplomová práce], Chalmers University of Technology, Goteborg,2012.
-
DOHNALOVÁ E., Vysokoteplotní zkřehnutí feritické 14%CR ODS oceli v taveninách olova, [netištěná diplomová práce] Vysoké učení technické v Brně, Fakulta strojního inženýrství 2011.
-
Patentový spis č. 89617, Úřad pro patenty a vynálezy, zveřejněno: 1959.
-
BANERJEE KUMKUM, Physical Metallurgy and Drawability of Extra Deep Drawing and Interstitial Free Steels, Jamshedpur, India.
-
Pluhař J., Puškár A., Koutský J., Macek K., Beneš V., Fyzikální metalurgie a mezní stavy materiálu, Alfa 1987.
-
CHEN W.F., LUI E.M., Principles of Structural Design, Taylor & Francis 2006.
-
HERRING D.H., Principles of Gas Nitriding- The Nitriding Process 1., 2011.
-
LOSERTOVÁ MONIKA, učební text Progresivní materiály, Technická univerzita Ostrava, 2012.
-
LIŠČIČ B., TENZI H.M., CANALE C.F.L., TOTTEN G.E., Quenching Theory and Technology, Taylor & Francis 2010.
-
HUMPHREYS F.J., HATHERLY M., Recrystallization and Related Annealing Phenomena, Elsevier, 2004.
-
ASKELAND D., Science and Engineering of Materials, Nelson Thomas. 1998.
-
MARTINEK R., Senzory v průmyslové praxi, BEN Praha 2004.
-
Informační materiály firmy SCHMETZ: Vakuum-Ofenanlagen.
-
DEXTER G.W., Kalení rychlořezných ocelí: metalurgické výhody soli, Heat Treating 1989.
-
BRINGAS J.E., Handbook of Comparative World Steel Standards, 2004.
-
TOTTEN E. GEORGE, Steel Heat Treatment Handbook, Taylor & Francis 2006.
-
VERHOEVEN JOHN D., Steel Metallurgy for the Non-Metallurgist, ASM International 2007.
-
LLEWELLYN D.T., HUDD R.C., Steel Metallurgy & Applications, Butterworth Heinemann 1998.
-
HEISER MATTHIAS, Report: Steels Fights Back Developments in Automotive Steels, Univerzity of Hertfordshire 2003.
-
JURČI P., STOLAŘ P., Zlepšení korozní odolnosti součástí z konstrukčních ocelí, konference Metal 2006.
-
JENČÍK J., VOLF J., A KOL., Technická měření, ČVUT Praha 2003.
-
PLACHÝ J., NĚMEC M., BEDNÁŘ B., Teorie slévání, ČVUT Praha.
-
NOVÁK J., Základy teorie chyb a zpracování fyzikálních měření
-
Sborník konference VTZ2011 Jihlava, Vakuové tepelné zpracování a tepelné zpracování nástrojů.
-
HOLBA PAVEL: prezentace: Teplo-Teplota-Energie-Entropie.
-
PAVELEK M., Termomechanika, 19. Přenos tepla zářením, FSI VUT Brno.
-
ROBERTS G., KRAUSS G, KENNEDY R., Tool Steels: 5th Edition, ASM International 1998.
-
COOMAN B. C .DE., CHIN KWANG-HUEN, KIM JINKYUNG, High Mn TWIP Steels for Automotive Applications, Pohang University.
-
Soubor přednášek: Jak efektivně a bezpečně udržovat pecní zařízení v kalírně, Asociace pro tepelné zpracování kovů, Praha 2012.
-
STOLAŘ P., prezentace: Údržba senzorů v tepelném zpracování.
-
RAFI ULLAH KHAN, Vacuum Gas Carburizing- Fate of Hydrocarbons, [netištěná disertační práce], Univesity Karlsruhe 2008.
-
LAPČÍK V., Výrobní a environmentální technologie, Technická univerzita Ostrava,2008.
-
Informační materiály firmy Autosteel: AHSS 101 THE Evolving use of Advaced High- Strenght Steels for automotive applications, 2011.
Poslední změna:
31.10.2013
|
|
| |