|
|
Main menu for Browse IS/STAG
Course info
KVU / BTDM
:
Course description
Department/Unit / Abbreviation
|
KVU
/
BTDM
|
Academic Year
|
2023/2024
|
Academic Year
|
2023/2024
|
Title
|
Design Modelling Technology
|
Form of course completion
|
Pre-Exam Credit
|
Form of course completion
|
Pre-Exam Credit
|
Long Title
|
Design Modelling Technology and Mould Making
|
Accredited / Credits
|
Yes,
4
Cred.
|
Type of completion
|
Practical
|
Type of completion
|
Practical
|
Time requirements
|
Seminar
3
[Hours/Week]
|
Course credit prior to examination
|
No
|
Course credit prior to examination
|
No
|
Automatic acceptance of credit before examination
|
Yes in the case of a previous evaluation 4 nebo nic.
|
Included in study average
|
NO
|
Language of instruction
|
Czech, English
|
Occ/max
|
|
|
|
Automatic acceptance of credit before examination
|
Yes in the case of a previous evaluation 4 nebo nic.
|
Summer semester
|
0 / -
|
7 / 7
|
3 / 3
|
Included in study average
|
NO
|
Winter semester
|
0 / -
|
0 / -
|
0 / 2
|
Repeated registration
|
YES
|
Repeated registration
|
YES
|
Timetable
|
Yes
|
Semester taught
|
Winter + Summer
|
Semester taught
|
Winter + Summer
|
Minimum (B + C) students
|
10
|
Optional course |
Yes
|
Optional course
|
Yes
|
Language of instruction
|
Czech, English
|
Internship duration
|
0
|
No. of hours of on-premise lessons |
|
Evaluation scale |
S|N |
Periodicity |
každý rok
|
Periodicita upřesnění |
|
Fundamental theoretical course |
No
|
Fundamental course |
No
|
Fundamental theoretical course |
No
|
Evaluation scale |
S|N |
Substituted course
|
None
|
Preclusive courses
|
N/A
|
Prerequisite courses
|
N/A
|
Informally recommended courses
|
N/A
|
Courses depending on this Course
|
N/A
|
Histogram of students' grades over the years:
Graphic PNG
,
XLS
|
Course objectives:
|
The aim of the course is to provide to students information about materials for creation of models made from polyester, epoxy or polyuretan. Give students information about casting of models into various types of moulds and their rough-working. Inform them about casting of simple models into lukopren wedge mould. Through the practical examples and exercises students acquire procedural knowledge some of the technological methods of design modelling and creating of moulds.
|
Requirements on student
|
Credit requirements: - Regular active participation in seminars within the time specified schedule - at least 80 per cent. - Successful working up of a knowledge test - Ongoing compliance, consulting and submitting all assigned tasks in the seminar required quality and deadlines established teacher.
|
Content
|
1. Familiarization with production technology of plaster and lukopren moulds, casting the model into epoxy, polyurethan resins. 2. Creation of one-part disposable plaster mould. 3. Creation of multi-part disposable plaster mould. 4. Creation of one-part lukopren-silicon mould 5. Creation of multi-part lukopren wedge mould for laminating techniques - polyester, epoxy. 6. Creation of multi-part lukopren wedge mould for laminating techniques - polyester, epoxy. 7. Creation of multi-part lukopren wedge mould for polyurethan resin. 8. Familiarization with materials for production models - polyester, epoxy, polyurethan, soft and heavy plastic 9. Converting model into polyester, epoxy resin 10. Converting model into polyester, epoxy resin 11. Converting model into polyester, epoxy resin 12. Creating model made from polyurethan resin 13. Surface correction of models
|
Activities
|
|
Fields of study
|
|
Guarantors and lecturers
|
|
Literature
|
|
Time requirements
|
All forms of study
|
Activities
|
Time requirements for activity [h]
|
Individual project (40)
|
40
|
Preparation for formative assessments (2-20)
|
10
|
Contact hours
|
39
|
Undergraduate study programme term essay (20-40)
|
20
|
Total
|
109
|
|
Prerequisites
|
Knowledge - students are expected to possess the following knowledge before the course commences to finish it successfully: |
to list individual types of casting and molding materials for gypsum and clay,
in the deepening or newly discussed technological procedures, take advantage of other knowledge gained in the subject areas of technology |
Skills - students are expected to possess the following skills before the course commences to finish it successfully: |
to identify individual types of materials for the casting and forming of gypsum and clay,
to apply to deepening or newly discussed technological processes the skills acquired in the subject of technology,
to process base materials for molding (modeling mass, plaster, etc.), to create models according to the pattern,
respecting occupational safety |
Competences - students are expected to possess the following competences before the course commences to finish it successfully: |
N/A |
|
Learning outcomes
|
Knowledge - knowledge resulting from the course: |
describe and explain the technological processes of molding for the realization of lukopren - silicon forms, multi - part lukopren wedge molds for polyurethane resin,
characterized by technological materials: polyester, epoxy, polyurethane, soft and hard plastics, polyester epoxy resins,
to describe the technological processes of casting the model from epoxy, polyurethane and polyester resin,
to describe the technological processes of the subsequent retouching |
Skills - skills resulting from the course: |
to assess the adequacy of the chosen technological approaches, theoretically to design its improvement variants,
to make a multi-part disposable gypsum form or a one-piece lukoprene form,
to make a model of polyurethane resin, to make his retouching |
Competences - competences resulting from the course: |
N/A |
|
Assessment methods
|
Knowledge - knowledge achieved by taking this course are verified by the following means: |
Seminar work |
Test |
Individual presentation at a seminar |
Continuous assessment |
Skills - skills achieved by taking this course are verified by the following means: |
Skills demonstration during practicum |
Continuous assessment |
Seminar work |
Self-evaluation |
Competences - competence achieved by taking this course are verified by the following means: |
Portfolio |
Self-evaluation |
Individual presentation at a seminar |
Practical exam |
|
Teaching methods
|
Knowledge - the following training methods are used to achieve the required knowledge: |
Seminar classes |
Lecture with visual aids |
One-to-One tutorial |
Self-study of literature |
Interactive lecture |
Skills - the following training methods are used to achieve the required skills: |
Seminar |
Task-based study method |
Group discussion |
Students' portfolio |
Interactive lecture |
Competences - the following training methods are used to achieve the required competences: |
Students' portfolio |
Discussion |
Skills demonstration |
|
|
|
|